Windows Server 2012 Essentials Error: DHCP Failed To Install 0x800F0922
Posted by Reprinted Article on 31 August 2013 07:00 PM
We are running a greenfield Windows Server 2012 Essentials with Exchange on-premises setup this weekend.
After setting the server’s IP to static we ran the DHCP Role install and hit:
This particular setup is being done in our shop. So, we are using one of our own Cisco units to provide gateway services.
In the end it turned out that when we configured the Cisco ISA520 for the network’s subnet we had left DHCP on!
So, when that error happens make sure there are no DHCP services running on the network. Once we turned the Cisco DHCP service off we were able to install the DHCP Role, Authorize it, and set up our scope.
Chef de partie in the SMBKitchen